How To Paint A Metal Interior Door?
- Joe Thomas
First, remove the door and its hardware. For optimal results, remove the door from its frame. This is optional, however it will facilitate achieving the finest possible end. Then, remove any door hardware, such as the letterbox, door handles, hinges (if the door has been removed from its frame), knockers, etc.
How do you paint a door’s interior?
Metal doors provide excellent security and weather resistance, but they must be regularly painted to prevent rust from forming on their surfaces. Here’s how you apply a fresh coat of paint to a faded, damaged, or otherwise tired-looking metal door. – Image of a Zillow Digs residence in Seattle, WA Steel doors are excellent at preventing wind and rain from entering our houses, and they are so sturdy that they may last a lifetime.
- If feasible, remove the door and cover any areas you do not intend to paint.
- Clean the door thoroughly with a degreaser.
- Sand the door lightly, then wash it off to eliminate any residual dust.
- Apply the primer and let it to dry. (If required, apply a second layer of primer)
- Apply at least two coats of satin or semigloss exterior paint.
- Allow paint to fully dry before rehanging the door.
Continue reading for comprehensive instructions on painting a metal door. Equipment & Materials
- Degreasing detergent
- Fine-grit sandpaper
- See complete list «
- Dust mask
- Safety goggles
- Artist’s tape
- Exterior primer
- Exterior satin paint
- Miniature paint roller
- Briefly napped roller cover
- Paint tray
- Tiny paintbrush
Before you excavate, be aware that doors painted prior to 1978 are likely to contain lead-based paint. If your door has lead-based paint, remove it according to EPA rules. Before undertaking this job, get the paint tested if you have any doubts. Photo: homedepot.com
Best Paint Type for Metal Doors – Use two or more coats of outdoor acrylic-latex paint of superior quality to paint your metal front door. Glossier paint sheens are more durable and simpler to clean. Use paint with a semi-gloss or gloss finish for your front door.
Can you paint over a steel door?
Article Download Article Download Painting or re-painting a steel door not only improves its appearance, but also helps prevent corrosion and surface damage! The basic cleaning and painting equipment required for the project may be found at a local hardware shop. First, loosen the door’s hinge pins. Open the door as far as possible to expose the hinges that hold it to the doorframe. Press a nail into the base of the hinge pin, which will be directly at the pivot point of the door. Hammer the nail until the hinge pin becomes free and the top is separated from the hinge panels. Repeat with the remaining door hinges.
- Although removing the door from its hinges will make painting considerably simpler, it is not required. If you reside in a colder area where drying paint may take longer, you should paint the door in its frame. It is dangerous to remove an outside door from its frame for several days if you cannot manage who or what may enter your home.
- It may be safer to paint the door in its frame than to remove it from its hinges and let it dry for many days.
2 Remove the door from its frame. Holding the door in place with one hand, remove the hinge pins from the door hinges with a flathead screwdriver. Carefully remove the door from the doorframe and lay it flat or over two sawhorses. Keep the hinge pins in a secure location while you work on the door, but replacements should be available at your local hardware store if you lose them. Advertisement 3 Employ a degreasing cleaner to clean the surface. Using a degreaser and a rag, thoroughly clean the door in order to provide a clean and smooth surface for the paint to adhere to.
- Any multi-surface spray cleaner should be suitable for cleaning your door. Degreasing cleansers for automobiles are an excellent option if they are more accessible.
- Always follow the manufacturer’s instructions when using a specific cleaning. For your own safety, some may need you to wear gloves or eye protection.
- Wipe the door down with a dry towel or let it in the sun for a couple of hours before proceeding.
4 Remove the door’s hardware completely. Using the proper screwdriver for each fixture, remove any door hardware that will not be painted. This might consist of the doorknob, strike plate, or door knocker.
- When removing hardware, always use a screwdriver rather than an electric drill. It may take longer, but it will be far simpler than having to repair any damaged hardware.
- Cover any hardware that you cannot or do not choose to remove using painter’s tape to protect it from being painted.
Advertisement 1 Tape off any parts that will not be painted. Slowly run a roll of painter’s tape around the door’s sides and cover each edge. This will aid in keeping the paint on the face of the door and in achieving the cleanest lines possible around each edge. It may be tough to trim the door with tape along lengthy or uneven edges, but doing so will make the painting procedure much simpler in the long run. 2 Repair any dents on the surface of the door. Before painting the door, take the time to repair any dents on its surface. Sand any damaged areas using 80-grit sandpaper before applying a small amount of patching compound or car body filler. After approximately 40 minutes, sand the area using 150-grit sandpaper to make it flush with the rest of the door. 3 Completely sand the door using 400-grit sandpaper. To ensure that the primer and paint stick to the door’s surface, it should be gently sanded. Apply sandpaper with a grit of about 400 to the whole surface of the door. You do not need to sand the door’s whole surface, just enough to give the primer something to adhere to. 4 Cleanse the surface with a moist towel. Sanding can generate a great deal of dust that might adhere to the paint and detract from the appearance of the completed door. Slightly dampen a clean cloth and wipe down the door’s surface to eliminate any remaining dust after sanding.
Before washing it down, use a vacuum cleaner to remove the bulk of dust if there is a great deal of dust or if the previous paint has come free during the sanding process. Advertisement Priming the door with an oil-based primer is the first step. Priming the door with a solution formulated exclusively for metal will extend the life of your paint job.
Use a small paint roller to apply two coats of priming to the door, allowing ample drying time between applications.
- Make sure the primer you use is compatible with the paint you intend to use. Each product should indicate which others they are compatible with, but if you are unclear, you may ask for assistance before purchasing them.
- In various climates, different primers will require different drying times. Between one and three hours are required for each application to dry completely. Lightly touch the door every hour until you are positive it is dry.
- If you wish to paint both sides of the door, you must work on one side at a time. Apply both coats of primer on the door and let to dry completely before priming the opposite side.
- If you use Direct-To-Metal paint, you may apply it to the door without first applying primer. Always adhere to the manufacturer’s guidelines when painting with a particular product.
2 Apply one layer of paint with a roller. Ensure that you are using an outside-appropriate paint, such as an exterior satin or semi-gloss paint. Use a brush to gently paint any grooves or panels on the door, followed by a tiny roller for the remainder. This will decrease brush strokes on the door once it has been painted.
- Before the paint dries, take sure to correct any drips or uneven roller strokes. It may be simpler to paint in the morning, early evening, or shadow, so that the paint does not dry too rapidly and remains wet while you are painting.
- Give the door ample time to dry between coats, typically 6 to 12 hours but occasionally up to 18. Check the paint’s label for further information on drying periods.
- EXPERT ADVICE Sam Adams is the proprietor of Cherry Design + Build, a residential design and construction company that has been operating for over 13 years in the Greater Seattle Area. Sam, a former architect, is now a general contractor specialized in house extensions and renovations. Utilize a sprayer or rollers to get a homogeneous texture. Sam Adams, a general contractor, states: “A professional sprayer, not a rattle can, is the ideal method for painting a steel door. The second-best method is to utilize foam rollers, since both provide a homogeneous texture for your steel door. If you paint the door with a brush, the end result will have a variety of brush strokes.”
- 3 If you intend to paint both sides of the door, give each side ample time to cure completely. Work on one side at a time, as even slightly damp paint can be harmed if it comes into touch with another surface too rapidly.
- 4. Apply a second paint coat. Each layer of paint will enhance your door’s appearance and increase its resilience to the weather. Allow the first coat to dry for at least six hours before applying a second coat.
- When applying paint, according to the manufacturer’s directions. They will probably advise you how many coats you need and how long you should allow each coat to dry.
- If you are dissatisfied with the appearance of the second coat of paint once it has dried, you may always apply a third.
5 Allow the paint to dry thoroughly. Allow your last layer of paint ample time to dry before reinstalling it. If the paint is still slightly wet, it may rub off onto the doorframe, necessitating a repaint. Leave it for as long as possible, but at least 12 hours in most cases.
Heat guns and similar equipment may help paint dry faster, but they don’t dry it uniformly and, if they’re too powerful, they might even harm the paint. If you use anything to speed up the drying process, do it with care. Reassemble and connect the door to its frame. Remove any painter’s tape from the door that was applied prior to painting.
Using a screwdriver, reinstall all removed hardware in its original position. Put the door back on its hinges and use a hammer to reinstall the hinge pins. After reattaching the door, you may wish to remove the weather stripping from the doorframe for a day or two. This will let the paint to dry more thoroughly before the edges are firmly pushed on the peeling. Advertisement Add fresh query Question How is a steel door painted without streaks? Sam Adams is the proprietor of Cherry Design + Build, a residential design and construction company that has been operating for over 13 years in the Greater Seattle Area. Sam, a former architect, is now a general contractor specialized in house extensions and renovations.
Professional Contractor Knowledgeable Response Utilize a sprayer or rollers to get a homogeneous texture. The best approach to paint a steel door is not with a rattle can, but with a professional sprayer. The second-best method is to utilize foam rollers, since both provide a homogeneous texture for your steel door.
If you paint the door using a brush, the completed result will have a variety of brush strokes. Ask a Question left 200 characters Include your your address to receive a notification once this question has been answered. Submit Advertisement